Why is my passenger seat belt light flashing?

Why is my passenger seat belt light flashing?

When you start the engine, the seat belt light will usually flash for a few seconds even if the seat belt is already secured. Sometimes, the seatbelt switch can get stuck or broken and the light won’t turn off. Clean out the buckle or replace it, if necessary, and everything should return to normal.

Why is my seat belt light flashing?

How does a seat belt reminder work?

The Reed Switch exists inside a seat belt buckle and determines whether or not the passenger is wearing their seat belt. It is one of the most reliable ways to detect if the seat belt has been engaged. This works together with the seat sensor that determines if someone is sitting in the first place.

What does the chime on a Cadillac CTS mean?

The Cadillac CTS has a seat belt chime to remind the driver and passenger to buckle their seat belts. This chime sounds as soon as the vehicle begins to move at a speed of more than 5 mph.

How to disable the seat belt alarm on your car?

How to Disable a Seat Belt Alarm 1 Beware of the airbag risk. 2 Check the user manual or ask your reseller to disable it per software. 3 Disable your alarm. See More….

How can I disable the chime on my car?

You can disable the chime from sounding. Move the driver’s seat to its most forward position. Do this for the back and base of the seat. Sit in the rear passenger’s seat, directly behind the driver’s seat of the vehicle. Reach under the driver’s seat, and locate the two-wire plug that runs into the female end of the seat belt.

Where is the seat belt plug located in a car?

Sit in the rear passenger’s seat, directly behind the driver’s seat of the vehicle. Reach under the driver’s seat, and locate the two-wire plug that runs into the female end of the seat belt. This wire will be the only wire running towards the center of your vehicle.