What should drivers do on wet roads?

What should drivers do on wet roads?

How to drive in heavy rain

  • Watch your speed.
  • Leave plenty of distance between you and the car in front.
  • Use your headlights on dipped beam.
  • Use your air conditioning to prevent internal condensation.
  • Take your foot off the accelerator if you aquaplane. Do not brake.

What should you do when driving on wet roads and why?

Slow down, avoid hard braking or turning sharply and allow ample stopping distance between you and the cars in front of you. Also, do these things one at a time. Brake, then turn, then accelerate.

How do you drive on a wet road?

Tips for Driving in the Rain

  1. Wait Until the Weather Improves if Possible.
  2. Double Check Your Car’s Equipment.
  3. Slow Down.
  4. Turn On Your Headlights.
  5. Use Your Windshield Wipers.
  6. Maintain a Safe Distance Between Cars.
  7. Avoid Heavy Braking.
  8. Watch Out For Standing Water.

Which of the following is true about driving on a wet roadway?

The faster you drive on a wet roadway, the less effective your tires will be at wiping the water from the road. If your speed becomes excessive enough, your tires will lose their grip on the road entirely and you will begin to hydroplane (that is, to slide down the road on a film of water).

What are three impairments driving on wet roads?

The road may become damp and slippery in fog, reducing traction. Some may pull off the road and stop, some may drive very slowly, and some may drive the speed limit. Some drivers may even become confused and drive against the flow of traffic.

What is a good rule to remember for passing?

A Drive with the flow of traffic and pass only as needed. Each time you pass another vehicle, there is an increased chance for a collision. If you are moving faster than surrounding traffic, you will have to continue passing others.

What does it mean when a driver’s hand is downward?

If a driver’s left arm and hand are extended downward, they are indicating that they intend to stop. Adjust your driving accordingly if following a driver who is using this hand signal.

What should you do when passing a vehicle?

When passing another vehicle, get through the other driver’s blind spot as quickly as you can without exceeding the speed limit. The longer you stay there, the longer you are in danger of having the vehicle collide with your vehicle. Never stay alongside, or immediately behind, a large vehicle such as a truck or bus.

How do you pass a car on the road?

Keep a safe following distance behind the vehicle you intend to pass. Pass vehicles only when there is no oncoming traffic for a safe distance. Check your outside and inside rear view mirrors. Do a shoulder check to the left to look for vehicles that may be passing you on the left.

What are the correct hand signals for driving?

What are the 3 Hand Signals for Driving? There are three main hand signals that every motorist and cyclist should become familiar with: Left turn, right turn, and slowing down/stopping. To indicate a left turn, extend your left arm out sideways with all your fingers extended.

What are the driver hand signals?

There are 3 basic driver hand signals: Slowing down or stopping – indicated by extending your arm downward with your palm facing backward. Left turn – indicated by an arm straight out through the window. Right turn – indicated by extending your arm at a 90° angle upwards.

What 9 steps should you take when passing on a two lane roadway?

Steps for Successful Passing

  1. Scan for hazards, e.g., oncoming vehicles, vehicles approaching from rear, merging vehicles;
  2. Check for blind spots;
  3. Signal your intention and accelerate into passing lane;
  4. Accelerate quickly to an appropriate speed;
  5. Concentrate on the path ahead;
  6. Check the mirror for following cars.

When to slow down on a wet road?

Wet roadway surfaces can be dangerously slick, especially immediately following a rainfall. When you are driving on wet roads, your vehicle is traveling on a thin layer of oil, dirt, and water. Slow down when there is heavy rain, standing water, or slush on the road to reduce the risk of your wheels losing traction on the slick surface.

What should you know about driving in wet weather?

Drive slowly. When driving in wet weather, you should always remember that the signed speed limit is the maximum safe speed in ideal driving conditions, so you may need to drive slower in wet weather.

What should you do if your car gets wet?

If this happens, you may lose control of your vehicle. To reduce your chances of aquaplaning in wet weather, slow down and do not use cruise control. If some of your vehicle’s tyres slip, but you still have some traction on the road, you are skidding.

Is it safe to drive on roads covered in water?

do not drive on roads covered with water (even partially covered) watch out for landslides—heavy rain can cause layers of rock and soil to move. stay away from stagnant water by the side of the road (it can be very bad for your health).