What is over dimensional cargo?

What is over dimensional cargo?

In simplest terms, ODC or Over Dimensional Cargo is a cargo that protrudes outside the loading deck of the vehicle transporting the cargo, cargo that extends beyond the normal deck of the cargo (may it be 20′ or 40′ or more). The over-dimensional cargo gets transported in flat racks and open tops.

What is considered an overheight load?

What is an Oversize Load? Simply, an oversize load is any load that exceeds the maximum legal width, height, and/or length as defined by each state or province in the United States and Canada. Typically, the maximum legal load width is 8.5 feet, and the maximum height limit is 13.5 to 14.5 feet.

What is over dimensional cargo in GST?

Over Dimensional Cargo refers to cargo carried as a single indivisible unit and which exceeds the dimensional limits prescribed in rule 93 of the Central Motor Vehicle Rules, 1989.

What is cargo securement?

Cargo Securement Definition of Terms The summation of the working load limits or restraining capacity of all devices used to secure an article of cargo on a vehicle. Anchor point. Part of the structure, fitting, or attachment on a vehicle or article of cargo to which a tie-down is attached.

What is over dimensional consignment?

An over dimensional consignment (ODC) is the one which when loaded in an ordinary wagon would infringe the standard moving dimensions of the gauge over which it is to move.

What does over dimension mean?

Overdimensional or “oversize” means the exceeding of statutory length, width or height limits.

What considered over height?

Per the California Vehicle Code (CVC), no loads shall exceed a height of 14 feet. Any vehicle or load which exceeds a height of 13 feet, 6 inches, shall only be operated on those highways where deemed to be safe by the owner of the vehicle or the entity operating the bus. …

What is the legal overhang on truck?

According to the United States Department of Transportation’s Federal Size Regulations law, cargo can overhang a vehicle in the front by 3 feet, on the side by 4 inches and in the rear by 4 feet.

What is ODC in e-way bill?

In case of non Over Dimensional Car- go(ODC), fora distance of less than 100 Km, the e-way bill will be val- id for a day from the relevant date. For every 100 Km or part thereof, thereafter, the validity will be additional one day from the relevant date.

What is ODC vehicle in EWAY bill?

Over Dimensional Cargo (ODC) shall mean cargo carried as a single indivisible unit which exceeds the limits prescribed under Rule 93 of Motor Vehicles Act, 1988. ODC is that which protrudes outside the loading deck of the vehicle transporting the cargo.

What are the general requirements of securing cargo?

Cargo must be firmly immobilized or secured on or within a vehicle by structures of adequate strength, dunnage or dunnage bags, shoring bars, tiedowns or a combination of these.

What does Fmcsr 393.118 cover?

§ 393.118 What are the rules for securing dressed lumber or similar building products? The rules in this section apply to the transportation of bundles of dressed lumber, packaged lumber, building products such as plywood, gypsum board or other materials of similar shape.

Which is an example of an over Dimensional cargo?

Neelu Roadways is a sister concern of Nimbus Logistics. The above is an example of an over dimensional cargo in all three dimensions ie length, width and height. Even if the loading deck was larger to match the length and width of the cargo, the cargo still would have classified as ODC being over the upper bounds defined in CMVR.

Which is over Dimensional cargo and which is ODC?

If a truck with loading platform length of 20 feet is loaded with cargo like TMT bars of length 22 feet, then the TMT bars qualifies as Over-Dimension Cargo. If the same TMT bars were loaded on a vehicle with platform length of 22+ feet, it would have been classified as Normal Cargo rather than ODC.

What are the challenges of shipping over dimensional freight?

Shipping over dimensional freight requires concentration and experience, drivers must be looking farther ahead down the road than the average vehicle and assessing potential obstacles at all times. It also requires a team of professionals on the road and in the office to successfully deliver the cargo to its destination.

How to get permission for over Dimensional cargo?

Permission: Every Over dimensional cargo requires a permission from the state authorities before plying on the road. The permission takes 3-4 days to obtain. In the case of Hydraulic Axles, the permissions for GVW of up to 169 MT can be obtained instantly using the website of MORTH .