What are the main reasons for lockout/tagout Loto procedures?

What are the main reasons for lockout/tagout Loto procedures?

What is the purpose of a lockout/tag out program?

• Contact with a hazard while performing tasks that require the removal, by-passing, or deactivation of safe guarding devices.
• The unintended release of hazardous energy (stored energy).
• The unintended start-up or motion of machinery, equipment, or processes.

What are the fatal five main causes of lockout/tagout injuries?

These were:

• Failure to stop equipment. While this may seem just common sense, it isn’t, due to some employee attitudes.
• Failure to disconnect from the power source.
• Failure to drain residual energy.
• Accidental restart of machinery.
• Failure to clear work areas before restarting.

What is the #1 cause of work related fall?

The top three leading causes of work-related injuries – overexertion and bodily reaction, slips, trips and falls, and contact with objects and equipment – account for more than 84% of all nonfatal injuries involving days away from work.

What is the leading cause of fatal work related injuries?

Fatal event or exposure Events involving transportation incidents continued to account for the largest share of fatalities. (See chart 3 and table 2.) Falls, slips, and trips increased 11 percent in 2019 to 880.

What is the purpose of a LOTO procedure?

The purpose of a “Lockout/Tagout” procedure is to protect employees from machines and equipment capable of causing injury due to unexpected energization, release of stored energy or the start-up of equipment while an employee is performing maintenance or servicing equipment.

What are LOTO procedures?

According to OSHA, lockout/tagout (LOTO) protocols are “specific practices and procedures to safeguard employees from the unexpected energization or startup of machinery and equipment, or the release of hazardous energy during service or maintenance activities.” In this column, we’ll provide a high-level overview of …

What does energy isolation mean?

Energy Isolation / Lock-Out / Tag-Out Program. Modern machinery can contain many hazards to workers from electrical, mechanical, pneumatic or hydraulic energy sources. Disconnecting or making the equipment safe to work on involves the removal of all energy sources and is known as isolation.

What are the types of hazardous energy?

There Are Many Different Sources of Hazardous Energy

• Mechanical energy. Energy created by a machine’s moving parts, like wheels, springs or elevated parts.
• Hydraulic energy.
• Pneumatic energy.
• Chemical energy.
• Thermal energy.
• Stored energy.

What are the main causes of accidents at workplace?

Why do workplace injuries occur? The 5 most common causes of workplace accidents

• 1) Overexertion and tiredness. Most types of physical activity will become tiring if they are carried out over a long period of time.
• 2) Slips, trips and falls.
• 3) Distractions.
• 4) Messy work environments.
• 5) Cutting corners.

What is the primary purpose of the lockout/tagout program?

The lockout/tagout standard establishes the employer’s responsibility to protect employees from hazardous energy sources on machines and equipment during service and maintenance.

What is the primary purpose of locking and tagging out a machine?

How often are workers injured in Loto accidents?

Injury records show some 50,000 workers injured annually in unintentional equipment startup accidents, with 120 fatalities. Even with the law in place, LOTO is one of OSHA’s most violated standards. It’s also among the most expensive of violations. Need to do lockout/tagout training?

Why was Loto not performed in lockout accident?

Because the company that employed the worker was not scheduled to perform any maintenance on that particular circuit, the company was not perceived to be affected or authorized when the LOTO was performed.

Is it a good practice to use Loto?

LOTO is not only good practice but also the law, as set forth in 29 CFR 1910.147, dealing with the control of hazardous energy. There’s good reason that law exists. Injury records show some 50,000 workers injured annually in unintentional equipment startup accidents, with 120 fatalities.

What was the worker’s job in the lockout accident?

The worker involved in the incident was assigned to clean the switchgear and vacuum bottles in a section of equipment that had been properly locked out, tagged out, tested, and grounded. The work on this section of switchgear had been ongoing for a couple of days.