How do I clear the error code on my Electrolux dishwasher?

How do I clear the error code on my Electrolux dishwasher?

Repair or Check: Press and hold the AIR DRY pad button for 3 seconds while the door is latched (or door open on newer models). This will unlock the control pad and the light goes out. The unit will display the last cycle ran. Repair or Check: Remove power to the dishwasher.

Why is my Electrolux dishwasher beeping?

If the dishwasher beeps 3 times or the LED flashes 3 times it indicates a leak, and water collecting at the bottom of the appliance. To resolve the issue, contact an Authorized Service Center. Warning: Turn off the dishwasher water supply to avoid flooding.

How do I fix the error code 30 on my Electrolux dishwasher?

Error message i30 may indicate an internal leak, caused by water collecting in the base of the appliance. In this case, a visit by an authorised service technician will be required.

How do I unlock my Electrolux dishwasher?

If your Electrolux dishwasher door locked and won’t open, this code will appear. You won’t be able to run a cycle without unlocking the door. Press and hold the AIR DRY button on the control panel for at least 3 seconds while the door is latched. This should unlock the door or activate the control panel for use again.

Why are all the lights flashing on my Electrolux dishwasher?

If the water doesn’t reach the proper temperature after a set amount of time, a light on the control panel might start flashing. To determine if the heating element has burned out, use a multimeter to test it for continuity. If the heating element does not have continuity, replace it.

Why is my dishwasher constantly beeping?

Beeping sounds from Dishwasher If your dishwasher is beeping, you likely need to adjust a component, replace a part, or have the dishwasher reset. Dishwashers contain electronics with sensors, which may make beeping sounds or display blinking lights to warn the user that an issue has occurred.

Why is my dishwasher foaming?

This is caused by one thing – using the wrong product in the dishwasher. Dish soap that you use to wash dishes in the sink is not the same soap used in a dishwasher. If you do put it in there, either as residue on dishes or just as the detergent, it will foam up like crazy.