Admin Table of Contents
Where is the front brake light switch on a Harley Davidson?
The switch is located in your right side, lower switch housing. To remove the switch, you will have to remove your front master cylinder and your throttle grip (throttle cables can stay with the housing). Unscrew and remove the right turn signal switch and cut any necessary tie wraps.
How do you check a brake light switch with a test light?
Place the sensor on just one of the two wires and hold the brake pedal down as you do so. Then test the other wire. If power is connected and the switch is working properly, the test bulbs will illuminate. If it doesn’t light up, the brake light switch is faulty and will need to be replaced.
Where is the brake light switch on a Harley Davidson?
The switch is located in your right side, lower switch housing. To remove the switch, you will have to remove your front master cylinder and your throttle grip (throttle cables can stay with the housing). Unscrew and remove the right turn signal switch and cut any necessary tie wraps.
What does it mean when your brake light is stuck?
A majority of the time, the brake light is actually stuck on. This, most typically, is an indication that your front brake light switch is misaligned or broken. There are a few common ways a front brake switch gets damaged.
Can a front brake light switch be replaced?
OEM replacement front brake light switch meets or exceeds original equipment specifications. Fitment is guaranteed or your money back plus free return shipping. Don’t waste time installing a product that doesn’t fit.
What kind of wire does a brake light use?
It uses two wires.Typically an orange wire (or orange with a white tracer) is the constant 12 volts which powers the switch. A red wire (or red with a yellow tracer) is powered when the switch is activated and sends 12 volts to the brake light, a module, or relay depending on the year and model.