# What is meant by source transformation?

## What is meant by source transformation?

Source transformation is the process of simplifying a circuit solution, especially with mixed sources, by transforming voltage sources into current sources, and vice versa, using Thévenin’s theorem and Norton’s theorem respectively.

Why is source conversion needed?

Source transformation methods are used for circuit simplification to modify the complex circuits by transforming independent current sources into independent voltage sources and vice-versa. To analyse the circuits we can apply a simple voltage and current divider techniques by using these transformations.

What is source conversion elaborate one example?

Let us understand this technique of source transformation using an example. Example: Convert the following current source to equivalent voltage source. Thus, the strength of voltage source will be 100 V. The internal series resistance of this source will be equal to the resistance of current source i.e. 10 Ω.

### What is source transformation and source shifting?

Shifting of current source within the network is undertaken so as to make the given electrical circuit suitable for current-to-voltage source transformation. The reason for this is that, while shifting the current source, we have to maintain the same current at all the nodes of the associated network.

What is source conversion in electrical circuit?

ANSWER. Source conversion is an application of Norton’s and Thevenin’s Theorem. It is a process to obtain a simplified circuit by converting the voltage source into current source and vice versa using ohm’s law.

What is the impedance triangle?

Impedance Triangle is a right angled triangle whose base, perpendicular and hypotenuse represents Resistance, Reactance and Impedance respectively. It is basically a geometrical representation of circuit impedance.

## How can we convert voltage source into current source?

The process involves replacing the voltage source V in series with a resistor R with an equivalent network which has a current source I=VR I = V R in parallel with a resistor R. The current source is oriented such that the arrow points towards the positive terminal of the voltage source being replaced (see Figure 4).

What are two port parameters?

Following are the types of two port network parameters.

• Z parameters.
• Y parameters.
• T parameters.
• T’ parameters.
• h-parameters.
• g-parameters.

What is source example?

The definition of source is where someone or something came from. An example of a source is solar energy coming from the sun. An example of a source is the person who inspires you. An example of a source is the person who gives a juicy story to a magazine reporter. noun.

### What is source transformation-conversion of voltage to?

Source Transformation: Conversion of Voltage Source into Current Source When the voltage source is connected with the resistance in series and it has to be converted into the current source than the resistance is connected in parallel with the current source as shown in the above figure. Where I s = V s /R

Which is a source in the energy conversion process?

In the energy conversion process, a source is main ly a generator (called often input source) or a load (called output source).

When do you use the source transformation method?

Source transformations are used to exploit the equivalence of a real current source and a real voltage source, such as a battery.

## How is a current converted to a voltage?

Conversion of Current Source into Voltage Source In the above circuit diagram a current source which is connected in parallel with the resistance is transformed into a voltage source by placing the resistance in series with the voltage source. Where, V s = I s / R