Admin Table of Contents
What is full section?
Full Sections When a cutting plane line passes entirely through an object, the resulting section is called a full section Fig. 7 illustrates a full section. It is possible to section an object whenever a closer look intentionally is desired. Here is an object sectioned from two different directions.
What are the types of section?
6 Types of sectional views
- Full sections.
- Half sections or views.
- Offset sections or views.
- Broken out sections or broken views.
- Revolving sections or view.
- Removed sections.
What is meant by Section AA?
The cutting plane is represented by a cutting plane line. The cutting plane line is defined as A-A, and the section view is defined as view A-A. Figure 4-42. All surfaces directly visible must be shown in a section view.
What is removed section?
The removed section view is a zero-thickness slice through the model showing only cut edges and hatching perpendicular to the cutting line. It’s easy, just select two opposed model edges and a view is created perpendicular to the section line, eliminating the need to create any additional construction geometry.
How are volumes of solids with known cross sections determined?
Volumes of Solids with Known Cross Sections. Because the cross sections are semicircles perpendicular to the x ‐axis, the area of each cross section should be expressed as a function of x. The diameter of the semicircle is determined by a point on the line x + 4 y = 4 and a point on the x ‐axis (Figure 2 ).
When does a section plane intersect an edge of a solid?
The point at which the section plane intersects an edge of the solid is called the point of intersection (POI). A section view is created by passing an imaginary cutting plane vertically through the center of the part. This figure is a 3D representation of the part after it is sectioned.
When is a cutting plane called a full section?
When a cutting plane line passes entirely through an object, the resulting section is called a full section Fig. 7 illustrates a full section. It is possible to section an object whenever a closer look intentionally is desired.
Which is the branch of physics that deals with solids?
The branch of physics that deals with solids is called solid-state physics, and is the main branch of condensed matter physics (which also includes liquids). Materials science is primarily concerned with the physical and chemical properties of solids.