How much electricity does an outdoor fountain use?

How much electricity does an outdoor fountain use?

Shockingly, submersible water pumps for most birdbaths and fountains use between 2.5 and 23 watts, which translates to just $3 on up to $25 per year for non-stop operation. Before purchasing a pump, you can confirm its energy use by looking for its wattage and then doing a little math.

How much electricity does it take to run a fountain?

Water fountains don’t use a lot of electricity, but they can become pricier if you use high-end pumps. Less water and horsepower will reduce electrical consumption, but it’ll also lessen the effect of the fountain. Most water fountains cost less than $50 per month to operate several hours per day.

How many kw does a water pump use?

A typical water pump’s wattage can vary between 250 watts to 1,100 watts. Take the wattage of the specific water pump and multiply it times how many hours a day it runs. Then, multiply it by how many days a year it runs, and divide by 1000. This will give the amount of kilowatt-hours the pump is using.

How much power does a water pump?

To give you a rough estimate the average rated power of water pump is from 250 watts to 1500 watts. Smaller the water pump, less is the wattage, less is the power consumption, hence low is the discharge and head.

Do water features use a lot of electricity?

Many water features are self-contained, so the water just circulates. You may just need to top up the water occasionally. If the feature has moving water, you will probably need an electricity supply to drive the pump, unless the feature is solar powered. Practically all water features will work the same way.

Should a fountain run all the time?

Water fountain pumps are meant to run 24/7. It is harder on the pump if it is turned on and off continuously. You should not need to turn your fountain off as long as there is enough water in the fountain for the allotted time.

How many amps does a water fountain use?

115 Volts, 60Hz, rated watts: 370, full load amps: 5. Perfect for either public or private settings, our stainless steel electric drinking fountains are a great fit in indoor environments.

How do you calculate kWh for pumps?

How To Calculate the Cost of Running A Pool Pump

  1. Multiply the voltage rating by the amperage rating. This will give the total watts.
  2. Divide the total watts by 1,000 to get kilowatts (kW). Example: 2,139 watts / 1,000 = 2.139 kW.
  3. Multiply the hours per day you run the pool pump by the kW.

Should I turn off water fountain?

The only times you should turn off the fountain pump is if you are cleaning it or if you are going to be away from it for several days. It is better to turn it off than to risk the water levels getting low and the pump running dry while you are gone.

Do water fountains use a lot of water?

They average about five gallons to fill them up and need to be topped off about twice a week. This water loss comes almost entirely from evaporation, Schopper said. The amount of water used in a week for such a fountain is the equivalent of a couple new-toilet flushes.