Admin How long does it take to change struts on a van?
It takes about 2 to 3 hours to replace struts. The time to get the struts replaced depends on the skill level of who is replacing them and how rusted the bolts and joints are. When you have worn-out struts, you have to replace them because they can cause more damage.
How much is labor for front struts?
An individual strut assembly will cost about $150 to $300 so you’re looking at around $300 to $600 for parts alone. Labor alone will set you back about $150 to $300 for the pair.
How do you change the struts on a car?
Place the strut assembly back into the strut tower and replace the strut tower bolts. Now you can tighten the bolts with your wrench, securing the strut assembly to the steering knuckle and torquing to the manufacturer’s specifications. If you needed to move the sway bar or the brake line support, replace these at this time.
Where are the strut bolts located on a car?
Once the strut bolts are out the strut and steering knuckle are separated. Open the hood and locate the strut towers to remove the bolts. Usually they are located at the midpoint of the inside fender well and look like cylinders. They are most likely held in by three small bolts.
What happens if you remove the center nut on a strut?
Do not remove the center nut or the strut will come apart and it is under high spring tension. Since you’ve removed the bolts from the steering knuckle, the strut might fall loose after you remove these bolts. It might help to have a partner holding onto the strut assembly while you loosen these bolts. Pull the old strut free.
How do you remove a strut from a spring?
Remove the large nut on top of the strut with ratchet and socket combination, and hold the strut rod with a wrench just below the strut bearing. Make a note of the strut top plate rotation before removal and reinstall in the same position. The strut can now be removed from the spring while the spring is still compressed by the spring compressor.