How do you reload printer paper?

How do you reload printer paper?

Load Paper in the Paper Tray

  1. Pull the paper tray completely out of the machine.
  2. Press and slide the paper guides to fit the paper.
  3. Fan the stack of paper well.
  4. Load paper in the paper tray with the printing surface face down.
  5. Make sure the paper is below the maximum paper mark ( ).

How do I reset my printer after paper jam?

With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet. Remove USB cable, if present. Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.

How do I load a paper Lexmark printer?

Prepare a stack of paper for loading by first flexing and fanning the pages. Straighten the edges of the stack on a level surface. Squeeze the guide tab on the right-hand side and slide the side guides to the outside of the tray. Adjust the rear paper guide for the size of print media you will be loading.

How do I load 4×6 photo paper into my Brother printer?


  1. If the paper support flap is open, close it.
  2. Close the paper support.
  3. Pull the paper tray completely out of the machine.
  4. Open the output paper tray cover (1).
  5. Load the 4′ x 6′ paper into the paper tray.

How do I troubleshoot my Brother printer?

Follow the Best Troubleshooting Tips for Brother Printer: Try shutting down the printer and restart it if you encounter any problems in between periods. Periodically check the network / USB cable or USB port. Uninstall the old driver and reinstall the latest version of the printer driver.

Does Brother printer have a reset button?

Easiest and Best Way to Reset Brother Printer: Go to the “Settings” option and press “All Settings”. After that, go to the “Initial Setup” section and press the “Reset” button. Press the Up and Down keys to display the type of reset function, and then press the reset function key that you want to use.

Why is my printer not picking up paper?

If you’re having trouble with your printer not grabbing the paper, you may need to give the print rollers a good clean. To clean the print rollers, the best option is to use distilled water on cotton tips – you can use an alcohol based cleaner but this is not recommended as these will dry out the rubber over time.