How do I brighten the clock on my Bose radio?

How do I brighten the clock on my Bose radio?

You can brighten the display by holding down the CLOCK SET button and pressing the ‘volume up’ button.

How do I reset my Bose clock?

To set the clock:

  1. On the remote control, press and hold the Time – or Time + button until -CLOCK SET- appears on the system display. Tip: If no adjustments are made within 5 seconds, the system exits clock setup.
  2. Press the Time – or Time + buttons to set the time, or hold the buttons to scroll faster.

Does Bose Wave radio have a battery?

The Wave® radio’s 9 volt battery maintains the memory and backup alarm system for up to three days during a power failure, or while the radio is unplugged. Operating without this battery leaves the memory unprotected, but will not harm the radio.

How do I reset my Bose radio CD player?

Reset your Wave Radio/CD reset by following these steps:

  1. Turn the system off.
  2. Unplug the power cord from the power outlet.
  3. Remove any discs in the disc tray.
  4. Remove the battery located in the bottom of the system. Wait 30 Seconds.
  5. Reconnect the power cord.
  6. Test the system.

How do I change the battery in my Bose Wave radio?

Remote with a locking button:

  1. On the back of the remote, insert the tip of a ball point pen in the left side of the battery lock and push to the right.
  2. While holding the pen to the right, pull the battery door out of the remote.
  3. Remove the old battery and install a new CR2032 or DL2032 battery.

Why is my Bose soundTouch not turning on?

Be sure the power cord is connected to a working power outlet. You can also verify if the outlet works by connecting another electronic device, such as a lamp. If connected to a power strip (or surge protector), try bypassing the power strip and plug the power cord directly to a wall outlet.

Where is the reset button on Bose radio?

Reset your Wave Radio by following these steps: Remove the battery located in the bottom of the radio. Wait 30 Seconds. Reconnect the power cord. Test the radio.

How do I reset the alarm on my Bose Wave radio?

Setting an Alarm

  1. Turn off your system.
  2. Press and hold the Alarm Set button until the Alarm 1 indicator begins flashing on the system display.
  3. While holding Alarm Set, press the Tuning buttons to set the alarm time, or hold the buttons to scroll faster.

How to reset a Bose Wave Radio Alarm Clock?

You may try to reset the unit by unplugging and removing any batteries for several minutes, then reconnect power to see if able to regain normal display. Below is the information on using the alarm clock: On the radio, press and hold the Alarm Set button. The “Alarm” indicator for alarm 1 will begin to flash on the display

What does the music mean on a Bose alarm clock?

The music note indicates radio and the sound waves indicate the alarm tone. If no icons appear on the display, that means the alarm is turned off.. As far as the light dimming in and out, sound like a loose connection or failing lamp and would need to have the unit serviced to resolve..

Can you dim the light on a Bose radio?

However, if your unit is a Bose Wave Radio/CD, it could be achieved with a manual override. You can adjust the brightness setting of the display for both strong light and lowest light environments, but not for the medium light setting. Turn the system OFF before setting brightness levels.

How do I Set my Bose alarm 2?

The “Alarm 2” indicator will begin to flash on the display. You have 10 seconds to begin setting the alarm time by pressing either Tuning button. The displayed time changes slowly, then more rapidly as you hold the button Release Alarm Set when the desired alarm time is reached.